Samson 42-36 E - Removing the Regulator from the Pipeline; Removing the Actuator from the Valve

11-2 EB 3018 EN
Removal
11.2 Removing the regulator
from the pipeline
1. Support the regulator to hold it in place
when separated from the pipeline (see
the 'Shipment and on-site transport' sec-
tion).
2. Unbolt the anged joint.
3. Remove the regulator from the pipeline
(see the 'Shipment and on-site transport'
section).
11.3 Removing the actuator
from the valve
See 'Replacing the actuator' in the 'Servic-
ing' section.