That the products mentioned above comply with the requirements of the following standards:
Directive of the European Parliament and of the Council on the harmonization of the laws of the
Member States relating to the making available on the market of pressure equipment
2014/68/EU of 15. May 2014
Applied conformity assessment procedure for fluids according to Article 4(1) Module A
Technical standards applied: DIN EN 12516-2, DIN EN 12516-3, ASME B16.34
Manufacturer: SAMSON AG, Weismüllerstraße 3, 60314 Frankfurt am Main, Germany
Frankfurt am Main, 26. August 2022
ppa. Norbert Tollas
Senior Vice President
Global Operations
i.V. Peter Scheermesser
Director
Product Maintenance & Engineered Products
To Next Page
Loading...
