dB300a System Set-ups
Monitor
dB300
a
Monitor
dB300
a
This example shows a typical PA system using mixer with a pair of dB300a’s for the main left and right mix. A separate sig-
nal from the mixer’s AUX/MONITOR bus is sent to two additional dB300a’s placed in the tilt-back, wedge positions for use
as floor monitors. In order to increase the output of the monitor system, the use of an external graphic equalizer like one of
the Samson “D Class” or “S curve” series is highly recommended.
Live Band PA System With Monitors
ENGLISH
13
To Next Page
Loading...
