Samson EB 8015 EN User Manual

1-8 EB 8015 EN
Safety instructions and measures
NOTICE
!
Risk of valve damage due to the use of unsuitable lubricants.
The lubricants to be used depend on the valve material. Unsuitable lubricants may cor-
rode and damage surfaces.
Î Only use lubricants approved by SAMSON (uAB0100).
Risk of the process medium being contaminated through the use of unsuitable lubri-
cants and/or contaminated tools and components.
Î If necessary, keep the valve and the tools used free from solvents and grease.
Î Make sure that only suitable lubricants are used.
1.4 Notes on the use of an RFID tag
The RFID tag is subject to certain restrictions due to its application range (technical specica-
tions).
Î Observe the explosion protection certicates of the RFID tag when it is to be used on
valves installed in potentially explosive atmospheres.
Î Do not expose the RFID tag to strong electric elds.
Î Avoid electrostatic charging.
Î Observe the application range (technical specications) of the RFID tag.
1.5 Warnings on the device
Warning sym-
bols
Meaning of the warning Location on the device
Warning against moving parts
There is a risk of injury to hands or ngers due to the
stroking movement of the actuator and plug stem if they
are inserted into the yoke while the air supply is con-
nected to the actuator.

Samson EB 8015 EN Specifications

General

Brand	Samson
Model	EB 8015 EN
Category	Control Unit
Language	English