Samson EB 8015 EN User Manual

EB 8015 EN 15-1
Appendix
15 Appendix
15.1 Tightening torques, lubricants and tools
uAB0100 for tools, tightening torques and lubricants
15.2 Spare parts
1 Body/body with integrated seat
2 Flange/valve bonnet
3 Yoke
4 Seat (for bodies with screwed-in seat)
5 Plug (with plug stem)
7 Guide bushing (ange)
8 Threaded bushing (packing nut)
9 Stem connector nut
10 Lock nut
11 Spring
12 Washer
13 Stud bolt
14 Body nut
15 Packing (adjustable)
16 Packing
17 Body gasket
19 Bushing
21 Insulating section
22 Bellows seal
23 Guide bushing (insulating section)
24 Guide bushing (bellows seal)
25 Plug stem extension
26 Label (bellows seal or insulating section)
27/28
Fastening parts
31/34
29 Plug for version with bellows seal
30 Retaining washers
32 Bolt
33 Nut
37 Plug stem with bellows seal
39 Gasket
41 Nut
42 Screw plug with seal
44 Ring/ring nut
1)
45 Packing ring
1)
46 Gasket
1)
47 Support
1)
48 Hex screw
1)
49 Hex screw
1)
50 Lock
1)
51 Guide
1)
(several guides only for version
with graphite seal)
52 Ring
1)
(only for version with graphite
seal)
53 Snap ring
1)
61 Flow divider ST2
2)
62 Flow dividerST 1 or ST3
2)
63 Ring
2)
64 Gasket
2)
65 Gasket
2)
80 Nameplate
81 Grooved pin
82 Screw
83/84 Travel indicator scale
85 Screw
90 Cap
91 Protective cap
92 Nut
101 Bellows bonnet
102 Screw with snap ring
1)
(only for version
with bellows seal)
1)
Version with balanced valve plug
2)
Version with ow divider

Samson EB 8015 EN Specifications

General

Brand	Samson
Model	EB 8015 EN
Category	Control Unit
Language	English