Samson EXPEDITION XP40i - Using the Aux Input

11
Setting the EQ for Music
If you are using the XP40i or XP40iw
for music playback turn up the BASS
and TREBLE slightly to produce a “hi-fi”
frequency response that accentuates the
low and high range.
Setting the EQ for Vocal
If you are using your XP40i with a
microphone for speech only you and
reduce the BASS and TREBLE slightly, which
will produce a frequency response that
accentuates the vocal range.
Using the Aux input
The XP40i and XP40iw provide a convenient 1/8-inch line level input, which is ideal
for connecting a laptop or MP3 player. Use a standard 1/8-inch shielded cable to
make the connection. Note: Although the XP40i and XP40iw are mono units you
can plug a stereo signal into the AUX input and it will automatically convert the
signal to mono.
Operating the XP40i and XP40iw
Monitor