14
Using LINK to Connect Two XP40iw's
To use two XP40iw’s as one system, just connect each side using a standard, ¼-inch, shielded
instrument cable to the LINK jack located on the XP40iw’s rear panels. Both mixers and the
microphones (including the wireless microphone) or instruments connected to each of the
individual XP40iw’s will be heard in both speakers. Note: Be sure each XP40iw’s wireless
frequency is on a different channel so that the two wireless mics will work together
simultaneously.
Operating the XP40i and XP40iw
To Next Page
Loading...
