Samson MDR16 User Manual

25
MDR16 Specifications
Normal Limit
Frequency Response (Trim @ Min, unity gain ± 3 dB)
Mic to Main 15 Hz - 54 kHz 20 Hz - 35 kHz
Line to Main 5 Hz - 70 kHz
Aux Return to Main 5 Hz - 98 kHz
Line to Aux Send 5 Hz - 57 kHz
T.H.D. (Trim @ Min, +4dBu output, unity gain, 1 kHz w/30 kHz LPF)
Mic/Line to Main (Mono Ch) 0.02% 0.05%
Line to Main (Stereo Ch) 0.02% 0.05%
Line to Aux Send 0.02% 0.05%
Equivalent Input Noise ("A" filter on, input shorted)
Mic -128 dB -128 dB
Line -104 dB
Maximum Voltage Gain
Mic to Main 85 dB
Line to Main (Mono Ch) 50 dB
Line/Tape to Main (Stereo Ch) 20 dB
Aux Return to Main 20 dB
Mic to Aux Send 74 dB
Line to Aux Send (Stereo Ch) 41 dB
Residual Noise (30 kHz LPF, all control Min)
Main -96 dBu -85 dBu
Aux Send -82 dBu -82 dBu
Crosstalk (@ 1 kHz w/ 30 kHz LPF)
Ch vs. Ch -75 dB -70 dB
Input vs. Output -87.5 dB - 80 dB
Peak LED Sensitivity (before clipping)
3 dB 5 ± 2dB
CLIP Indicators
Turn on: THD> 0.1%
Headphone output (600 ohm load)
100 mW 90 mW min.
Maximum Input Level (1 kHz, ± 3dB)
Mic Input (Mono Ch) -8 dBu
Line Input (Mono Ch) +27 dBu
Input Channel Equalizer (± 2dB)
High (shelving) 12 kHz ±15 dB
Mid (peaking) Variable 100Hz - 5 kHz ± 15 dB
Low (shelving) 80 Hz ±15 dB
Meters
12 POINT LED METERS (-21, -18, -16, -12,
-9, -6, -3, 0, +6, +9, +20) PEAK
Internal DSP Effects
24 BIT -8 presets: 1 - Large Hall; 2 - Medium
Hall, 3 - Large Room; 4 - Vocal Room 1; 5
- Vocal Room 2; 6 - Chorus + Reverb; 7 -
Chorus + Delay; 8 - Stairwell
Phantom Power
+48V
Power Requirement
110V-240V, 50/60Hz
Power Consumption
50W
Dimensions (W x D x H)
22.75” x 16.25” x 3.75” (57.9cm x 41.3cm x
9.5cm)
Weight
17.5 lbs. (7.8 kg )

Samson MDR16 Specifications

General

Brand	Samson
Model	MDR16
Category	Music Mixer
Language	English