Samson S-direct plus - Connecting High Power Signals

Operating the S direct plus
7
Connecting to High Power Signals
The S direct plus provides the capability of tapping off the signals from amplifiers, such as
the output of a guitar amp with stereo effects or any power amplifier. You can even use S
direct plus to connect to the speaker output of a consumer stereo system or boom box, for
example, if you want to sample some old records or cassette tapes.
NOTE: Be sure that the LEVEL switch is set to the SPK position before connecting the
signal from the output of any amplifier.
The following diagram shows how to connect the powered output of a stereo guitar ampli-
fier to a PA mixer.
NOTE:
In this example , the S direct plus is tapping the sound of the instrument and amp, as opposed
to just the instrument itself.
SIGNAL FLOW
SIGNAL FLOW
SIGNAL FLOW
SIGNAL FLOW
Stereo Speaker
Cabinet
Typical Stereo Amp Hook-up
Mixe
r
Inputs
Amplifier
Stereo Output
Balanced
Output
Link
Outputs