EasyManua.ls Logo

Samson S500 - Specifications

Samson S500
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
Specifications
1. Rated Output Power, per channel (1 kHz, THD 0.1%, Both Ch Drive)
Stereo / Parallel modes
per channel (into 4 ohms) 250 W
per channel (into 8 ohms) 150 W
Bridged mode
per channel (into 8 ohms) 500 W
2. Frequency Response (0 dB, +0, -.5 dB) 10 Hz - 20 kHz
3. Total Harmonic Distortion
(1/2 power @ 20 Hz - 20 kHz, Both Ch Drive into 4 ohms) 0.04%
4. Dynamic Range 105 dB
5. Channel Separation (4 ohm, 125 W, 1 kHz) 80 dB
6. Residual Noise (0 dB ref. = .775 VAC rms, 22 Hz - 22 kHz)
(Att. Min.) -68 dBu
(Att. Max.) -74 dBu
7. Voltage Gain (4 ohm, 1 kHz) 33.5 dB
8. DC Offset Voltage 0 ± 100 mV
9. Damping Factor More than 200
10. Indicators
Clipping LED 1 kHz THD 0.1%
Signal LED Right -20 dB ± 2 dB
Signal LED Left -40 dB ± 2 dB
11. Dimensions 19 in (w) x 9.75 (d) x 5.25 (h)
482 mm (w) x 247 (d) x 133 (h)

Related product manuals