3
We know you don’t like reading owners manuals, but you’ve just purchased one of the finest sound
reinforcement power amplifiers around, and we want to tell you about it! So, before you plug in, we’d like
to suggest you take just a few moments out to scan these pages. We’ll make it as painless as possible,
we promise—and, who knows, you might just pick up a tip or two.
The Samson S500 is a double rack-space stereo power amplifier which is optimized for live sound
venues, commercial installations, and for driving small and medium-sized live PA systems. Fan-cooled
for maximum thermal protection, the S500 delivers 250 watts of power per channel (or, in Bridged mode,
500 watts), over the full frequency spectrum, from 10 Hz to 55 kHz. Combination connectors allow both
balanced XLR and balanced 1/4" TRS input connections; output connections are provided on both stan-
dard banana and advanced Speakon™ connectors. Front-panel controls and displays include a power
switch and LED, as well as independent left- and right-channel input level controls, three-segment LED
meters, and Protection LEDs.
In these pages, you’ll find a detailed description of the features of the S500, as well as a description of its
front and rear panels, step-by-step instructions for its setup and use, and full specifications. You’ll also
find a warranty card enclosed—please don’t forget to fill it out and mail it in so that you can receive online
technical support and so we can send you updated information about these and other Samson products
in the future.
With proper care your S500 will operate trouble free for many years. We recommend you record your
serial number in the space provided below for future reference.
Serial number:
Date of purchase:
Should your unit ever require servicing, a Return Authorization number (RA) must be obtained before
shipping your unit to Samson. Without this number, the unit will not be accepted. Please call Samson at
1-800-3SAMSON (1-800-372-6766) for a Return Authorization number prior to shipping your unit. Please
retain the original packing materials and if possible, return the unit in the original carton and packing
materials
Introduction
To Next Page
Loading...
Need help?
General