4-2 EB 5573 EN
Shipment and on-site transport
Storage instructions
− Protect the controller against external in-
uences(e.g.impact).
− Protect the controller against moisture
and dirt. Store it at a relative humidity of
lessthan75%.Indampspaces,prevent
condensation. If necessary, use a drying
agent or heating.
− Make sure that the ambient air is free of
acids or other corrosive media.
− Observe transport temperature depend-
ing on the permissible ambient tempera-
ture (see the 'Design and principle of op-
eration' chapter).
− Do not place any objects on the control-
ler.
To Next Page
Loading...
