Samson TROVIS 5573 - Page 42

7-8 EB 5573 EN
Start-up and conguration
7.5 Entering customized key number
To prevent the function and parameter settings being changed by unauthorized users, a cus-
tomizedkeynumbercanbeaddedtothexedservicekeynumber.Youcansetthecustom-
ized key number to be between 0100 and 1900.
How to proceed:
1. Turn the rotary switch to
(parameterandcongurationlevel).
Reading: 0 0 0 0
2. Enter key number 1995 [q].
3. Conrmkeynumber[Û].
4. Enter valid key number [q].
5. Conrmkeynumber[Û].
6. Enter customized key number [q].
7. Conrmcustomizedkeynumber[Û].
This number is the new key number.
8. Turn the rotary switch back to switch position
(information level).