What to do if my Samsung 4 channel DVR displays 'NO HDD' icon?
If you see the “NO HDD” icon and an error message, check the HDD connection. If the problem continues, contact the nearest service center to have the HDD checked.
What to do if the alarm won't turn off on my Samsung DVR?
If the alarm persists on your Samsung DVR, press the [MENU] button and try the following: 1) To release the event monitoring mode: Go to Monitoring Mode and set the duration of the event monitoring to Off. 2) To release the alarm sound: Go to Event Record Mode - Alarm (Motion Detection/Video Loss) and deactivate the alarm sound. 3) To release the event: Go to Event Record Mode - Alarm (Motion Detection/ Video Loss) and set the mode to Off.
Why won't my Samsung DVR record when I press the REC button?
If the REC indicator doesn't flash when you press the [REC] button on your Samsung DVR, check if there is free space on the HDD for recording. Also, verify that the record mode is set to ON in the record mode settings.
What to do if some channels display a black screen on my Samsung 4 channel DVR?
If some channels on your Samsung DVR display a black screen, check if the camera connected to the system properly displays the image and if the camera is properly supplied with power. If you are using a video distributor, try inputting the video source of the camera directly into the DVR.
How to fix a Samsung 4 channel that won't turn on?
If your Samsung DVR doesn't turn on, first check if the power supply system is properly connected and check the system for the input voltage from the power source. If the problem persists, check the power supplier and replace it with a new one if necessary.
Why doesn't the Channel button work on my Samsung 4 channel DVR?
The Channel button on your Samsung DVR will not work if the current screen is in the event monitoring mode. In the event monitoring screen, press the [ALARM] button to exit the screen and select a channel.
What to do if the cursor won't move to the Start button on my Samsung DVR during calendar search?
If the cursor won't move to the Start button during a calendar search on your Samsung DVR, check if the channel and the date that you want to play are marked with the V symbol. Both channel and date should be checked before you can start playing with the Start button.
Why is the time bar not displayed in Search mode on my Samsung 4 channel?
The timeline can switch between normal and extension mode. In extension mode, the time bar may not be displayed in the current timeline. Switch to normal mode or use the left or right button to navigate through the time bar.
General| Channels | 4 |
|---|---|
| Compression | H.264 |
| Operating System | Embedded Linux |
| Power Supply | 12V DC |
| Video Input | BNC |
| Video Output | HDMI, VGA |
| Recording Resolution | 1080p |
| Hard Drive Capacity | Up to 6TB |
| Remote Viewing | Yes |
Guides on connecting power and initial system boot-up and initialization.
Explains the correct procedure for safely shutting down the DVR system.
Explains the meaning and function of various icons displayed on the DVR's live viewing screen.
Explains how to switch between different live viewing modes like 4-split, PIP, and Auto Sequence.
Describes how to select output screen modes for the Spot Out port, useful for external monitors.
Covers setting the system's date, time, time zone, and interface language.
Step-by-step guide to configure date, time, and language settings on the DVR.
Instructions for setting or changing the administrator's ID and password for full system access.
Shows how to view system version, broadcast format, and MAC address, and how to update software.
Explains how to view system logs, including startup, shutdown, and settings changes.
Guides on configuring camera settings like video, audio, channel name, and dwell time.
Details how to check connected storage devices (HDD, USB), their status, and management options.
Details how to configure monitor display settings, including event display and item selection.
Explains how to set up a schedule for automatic recording on specific dates and times.
Covers setting resolution, frame rate, and quality for standard recording modes.
Details sensor operation, connected cameras, and alarm output settings.
Guides on setting detection regions, sensitivity, and alarm outputs for motion detection.
Provides instructions for backing up DVR data to a connected device, including range, channel, and format.
Covers setting the network connection route and protocol, including IP and bandwidth.
Details network setup for Static IP, Dynamic IP (DHCP), and ADSL modes without a router.
Guides on configuring SMTP server settings for email notifications.
Covers setting event intervals and types for email alerts.
Provides instructions for searching recorded video data by date and time.
Explains how to play back stored video data from the HDD or backup devices.
Introduces the Web Viewer software and its capabilities for remote access.
Lists the minimum hardware and operating system requirements for running the Web Viewer.
Covers configuring various system settings for the DVR remotely via the Web Viewer.
Instructions for changing the administrator ID or password via the Web Viewer.
Shows how to view current system information like software version and MAC address.
Guides on configuring settings for cameras connected to the DVR.
Details how to check and change settings for storage devices like HDDs and USB drives.
Explains how to set alarm output channels and durations for HDD errors.
Details how to configure monitor display settings, including event display and item selection.
Explains how to set up a schedule for automatic recording on specific dates and times.
Details sensor operation, connected cameras, and alarm output settings.
Guides on setting detection regions, sensitivity, and alarm outputs for motion detection.
Details network connection route settings, IP address, and bandwidth.
Covers configuring protocol-related settings like TCP/UDP and ports.
Guides on configuring SMTP server settings for email notifications.
Covers setting event intervals and types for email alerts.
Covers creating recipient groups and setting their permissions for receiving email alerts.
Details adding or removing email recipients and assigning them to groups.
To Next Page