English - 14
Adjusting the Volume
Using the Volume Button
1.
Press the VOL – or VOL + button to increase or decrease the volume.
Using the MUTE button
At any time, you can cut off the sound using the MUTE button.
1.
Press MUTE button and the sound cuts off.
“
” is displayed on the screen.
2.
To turn mute off, press the MUTE button again or simply press the
VOL – or VOL + button.
Viewing the Display
settings.
1.
Press the INFO button on the remote control.
The TV will display the channel, the type of sound, and the status of certain
picture and sound settings.
Press the INFO button once more or wait approximately 10 seconds and
the display disappears automatically.
➣
Viewing the Menus
1. With the power on, press the MENU button.
The main menu appears on the screen.
The menu’s left side has icons: Picture, Sound, Channel, Setup, Input,
Application.
2.
Then press the ENTER
button to access the icon’s sub-menu.
3. Press the EXIT button to exit.
The on-screen menus disappear from the screen after about one minute.
➣
Using the Button
The
button is used to select stations that broadcast a digital signal.
1. For example, for Channel 7-1, press 7, then
, then 1.
For quick channel change, press the number buttons, then press the
ENTER
button.
Using the PRE-CH Button to select the Previous Channel
1.
Press the PRE-CH button. The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one
channel, then use the number button to select the second channel.
Then use the PRE-CH button to quickly alternate between them.
➣
➣
➣
Mode
:
Standard
Backlight : 7
Contrast : 95
Brightness : 45
Sharpness : 50
Color : 50
Tint (G/R) : G50/R50
Detailed Settings
Picture
DTV Air
4-2
TV #8
Dolby Digital
9:59 am - 10:59 am
Sun, Sep 3 1:45 pm
Life On Venus Avenue
No Detaild Information
1080i
|
16:9
|
English
To Next Page
Loading...
