Activating Picture Options
1.
Press the MENU button to display the menu.
Press the ENTER
button to select “Picture”.
2. ENTER
button.
ENTER
button.
ENTER
button.
In PC mode, you can only make changes to the “Color Tone” and “Size” from
among the items in “Picture Options”.
Setting the Color Tone
1.
Follow the “Activating Picture Options” instructions numbers 1 and 2.
2. ENTER
button.
3.
“Warm2”. Press the ENTER
button.
“Warm1” or “Warm2” is only activated when the picture mode is “Movie”.
Settings can be adjusted and stored for each external device you have
connected to an input of the TV.
➣
➣
➣
➣
➣
Setting the Screen Size
Occasionally, you may want to change the size of the image on your screen. Your
types of video input. Your cable box or satellite receiver may have its own set of
screen sizes as well. In general, though, you should view the TV in 16:9 mode as
much as possible.
1.
Follow the “Activating Picture Options” instructions numbers 1 and 2.
2. ENTER button.
3.
Press the ENTER
button.
Press the EXIT button to exit.
16:9 : Sets the picture to 16:9 wide mode.
Zoom1
Zoom2
Wide Fit
4:3 : Sets the picture to 4:3 normal mode.
Just Scan: Use the function to see the full image without any cutoff
when HDMI (720p/1080i/1080p), Component (1080i/1080p) or DTV
(1080i) signals are input.
•
•
•
•
•
•
Tint (G/R) : G50/R50
Detailed Settings
Picture Reset
Picture
Picture Options
Size : 16:9
Digital NR : Auto
DNle : Off
HDMI Black Level : Normal
Film Mode : Off
Blue Only Mode : Off
ReturnEnter
Move
Picture Options
Color Tone : Normal
Size : 16:9
Digital NR : Auto
DNle : Off
HDMI Black Level : Normal
Film Mode : Off
Blue Only Mode : Off
ReturnEnter
Move
Cool2
Cool1
Normal
Warm1
Warm2
Size
16:9
Wide Fit
4:3
Just Scan
ReturnEnter
Move
Picture Options
Color Tone : Normal
Digital NR : Auto
DNle : Off
HDMI Black Level : Normal
Film Mode : Off
Blue Only Mode : Off
ReturnEnter
Move
To Next Page
Loading...
