English - 58
Adjusting the TV On/Off Melody Sound
A melody sound can be set to come on when the TV is powered On or Off.
1.
Press the MENU button to display the menu.
ENTER
button.
2. ENTER
button.
3. ENTER
button.
press the ENTER
button.
Off: Turns off the melody function.
Low: Sets the melody volume to low.
Medium: Sets the melody volume to medium.
High: Sets the melody volume to high.
•
•
•
•
Press the EXIT button to exit.
The Melody does not play
- When no sound is output from the TV because the MUTE button has been
pressed,
- When no sound is output from the TV because the volume has been
reduced to minimum with the VOL – button.
- When the TV is turned off by Timer function.
➣
Setting the Light Effect
You can turn the LED on the front of TV on/off.
1.
Press the MENU button to display the menu.
ENTER
button.
2.
ENTER
button.
3.
ENTER
button.
“Always”, then press the ENTER button.
Off: LED will not come on.
In Standby: Turns the LED on in standby mode.
When Watching TV: Turns the LED on while watching TV.
Always: LED will come on after you turn the TV off.
•
•
•
•
Press the EXIT button to exit.
Set the “Light Effect” to “Off” to reduce power consumption.
➣
Setup
V-Chip
Caption
Entertainment : Off
Energy Saving : Off
PIP
SW Upgrade
External Settings
Melody : Medium
Light Effect
Wall-Mount Adjustment
ReturnEnter
Move
Off
Low
Medium
High
Setup
V-Chip
Caption
Entertainment : Off
Energy Saving : Off
PIP
SW Upgrade
External Settings
Melody : Medium
Light Effect : In Watching TV
Wall-Mount Adjustment
ReturnEnter
Move
Off
In Standby
When Watching TV
Always
LED
To Next Page
Loading...
