Samsung 550 Series - Auto Wall-Mount Adjustment (Sold Separately)

English - 87
Auto Wall-Mount Adjustment (Sold separately)
Once the auto wall mount is installed, your TV’s position can be easily adjusted.
TV Rear Panel
Auto Wall-Mount
EX-LINK Cable
(Not supplied)
Entering the menu
1. 
The Wall Mount Adjustment screen is displayed.
If the Wall Mount Adjustment screen is not displayed when clicking on
a direction button while watching your TV, use the menu to display that
screen.
Press the MENU
“Setup”, then press the ENTER
button.
ENTER
button.

ENTER
button.
Remembering the Position
2. 
If you press an arrow button when no OSD is displayed on the TV screen,
the Adjustment screen appears.
Press the INFO
then press the ENTER
button. The position is initialized to the default
setting.
3. Press the Blue button.

Position 2 or Position 3 in order to save the current position.
To not save the current position, press the RETURN button.
When selecting a save mode, you cannot use the Color buttons.
4. Press the ENTER
button to save.
When Position1 is selected, the message “Current position saved as
Position1” is displayed.
5. Press the ENTER
button.
The saved Position appears on the left side of the OSD.
Moving to the remembered position
1. Complete Step 1 of “Entering the menu”.
2. Pressing a Color (Red, Green, Yellow) button moves the auto wall mount to
the saved position.
You can move the wall mount to one of the 3 pre-set positions by pressing the Red (Position 1), Green (Position 2)
or Yellow (Position 3) buttons.
If you adjust the position after moving to a pre-set position, the position display will disappear.
For installation, refer to the Installation Manual provided with the wall mount.
For product installation and the installation and moving of the wall mount, make sure to consult a specialized
installation company.
This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building
materials, please contact your nearest dealer.
The auto wall mount will not work when Anynet+ or WISELINK is operating.
LN37A550P3F, LN40A550P3F and LN46A550P3F models are not compatible with the older wall mount model
(WMN5090A).
➣
➣
•
•
•
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
Setup
V-Chip
Caption
  
Entertainment : Off
Energy Saving : Off
PIP
SW Upgrade
External Settings
Melody :
Medium
Light Effect :
When Watching TV
Wall-Mount Adjustment
ReturnEnter
Move
Save
Select a mode to Save.
Position1
Position2
Position3
Adjust Enter Return
Wall-Mount Adjusment
Adjust Save Center
INFO
1 2 3Position
Wall-Mount Adjusment
Adjust Save Center
INFO
1 2 3
Position1
Position