2-2 Setting Up Your Printer
Selecting a Location
Place your printer on a flat, stable surface near your workstation.
Leave enough space around the printer, so that you can easily:
• open the printer cover
• open the rear cover to remove jammed paper, or retrieve the paper
when you use the rear output path
• remove and install the paper cassette to load paper
• allow air circulation around the vents to prevent the printer from
overheating
Do not place the printer:
• in direct sunlight
• near heat sources or air conditioners. Place the printer where the
temperature is stable and set for human comfort.
• in dusty or dirty environments. Dust accumulation may prevent the
printer from functioning properly.
• near devices that contain magnets or generate magnetic field (such
as loudspeakers or base units of cordless telephones).
Make sure your printer is placed in a well ventilated area.
To Next Page