Samsung 750 series - Page 111

English - 109
Network Test
You can test or conrm the network connection status after setting up the network.
1. Press the MENU button to display the menu.
Press the  or  button to select “Setup”, then press the ENTER
button.
2. Press the  or  button to select “Cable Network Setup”, then press the
ENTER
button.
3. Press the  or  button to select “Network Test”, then press the ENTER
button.
The current network settings will appear.
Press the EXIT button to exit.
°
Cable Network Setup
Internet Protocol Setup : Auto Setup
Network Test 
IP Address :
0
0 0 0
Subnet Mask :
0
0 0 0
Gateway :
0
0 0 0
DNS Server :
0
0 0 0
EnterMove
Return
Setup
Time
Network selection : Cable
Cable Network Setup 
Wireless Network Setup
V-Chip
Caption
External Settings
Entertainment : Off
Energy Saving : Off
PIP
Network Test
MAC Address
IP Address, Subnet, Gateway, DNS Server
Gateway Ping
Domain Ping
Network Test Completed.
Your network is operating properly. If you still have a
network problem, contact your network service
provider.
Return