English - 30
Viewing Picture-in-Picture
You can use the PIP feature to simultaneously watchthe TV tuner and one external video source.
(See page 36 to select the PIP picture sound.) This product has one built-in tuner, which does not allow PIP to function in
the same mode. Please see ‘PIP
Settings’ below for details.
While V-Chip (See page 52) is in operation, the PIP function cannot be used.
Activating Picture-in-Picture
1. Press the MENU button to display the menu.
Press the or button to select “Setup”, then press the ENTER
button.
Press the or button to select “PIP”, then press the ENTER
button.
2. Press the ENTER
button again.
Press the or button to select “On”, then press the ENTER
button.
If you turn the TV off while watching in PIP mode and turn it on again, the
PIP window will disappear.
You can view Analog TV broadcasts on the PIP screen (sub-picture) when
the main picture is from an external device connected to HDMI 1,
HDMI/DVI 2, HDMI 3, HDMI 4, Component1, 2 or PC.
PIP Settings
Main picture Sub picture
Component 1, 2
HDMI 1, HDMI/DVI 2, HDMI 3, HDMI 4
PC
TV
Changing the Size of the PIP Window
3.
Press the or button to select “Size”, then press the ENTER
button.
Press the or button to select the required option, then press the ENTER
button.
You may notice that the picture in the PIP window becomes slightly
unnatural when you use the main screen to view a game or karaoke.
Changing the Position of the PIP Window
4. Press the or button to select “Position”, then press the ENTER
button.
Press the or button to select the required option, then press the ENTER
button.
In Double Window (
) and Double Wide ( ) modes, “Position”
cannot be selected.
°
°
°
°
°
°
Setup
Entertainment : Off
Energy Saving : Off
PIP
SW Upgrade
PIP
PIP : Off
Size :
Position :
Air/Cable : Air
Channel : Air 11
ReturnEnter
Move
Off
On
PIP
PIP : On
Size :
Position :
Air/Cable : Air
Channel : Air 11
ReturnEnter
Move
PIP
PIP : On
Size :
Position :
Air/Cable : Air
Channel : Air 11
ReturnEnter
Move
To Next Page
Loading...
