Samsung 750 series - Page 114

English - 112
Network Test
You can test or conrm the network connection status after setting up the network.
1. Press the MENU button to display the menu.
Press the  or  button to select “Setup”, then press the ENTER
button.
2. Press the  or  button to select “Wireless Network Setup”, then press the
ENTER
button.
3. Press the  or  button to select “Network Test”, then press the ENTER
button.
The current network settings will appear.
If no “Access Point Select” is set up, the test cannot be completed. (See
page 1
11)
Press the EXIT button to exit.
°
°
Network Test
MAC Address
IP Address, Subnet, Gateway, DNS Server
Gateway Ping
Domain Ping
Network Test Completed.
Return
Setup
Network selection : Wireless
Cable Network Setup
Wireless Network Setup 
V-Chip
Caption
External Settings
Entertainment : Off
Energy Saving : Off
PIP
SW Upgade
Wireless Network Setup
Internet Protocol Setup : Auto Setup
Network Test
Access Point Select : AP1
IP Address :
0
0 0 0
Subnet Mask :
0
0 0 0
Gateway :
0
0 0 0
DNS Server :
0
0 0 0
EnterMove
Return