English - 72
Viewing a photo
1. Press the W.LINK button on the remote control to display the “WISELINK
Pro” menu.
2. Press the or button to move to “Photo”, then press the ENTER
button.
Photo les are displayed.
3.
Press the or button to select the desired photo in the Photo list.
Then Press the Yellow button to select only one le.
4. Press the ENTER
button over a photo icon.
The currently selected photo is displayed in full screen.
Using the option menu during a slide show (or Viewing a Photo)
1. During a slide show(or viewing a photo), Press the TOOLS button to set the option.
2. Press the or button to select the desired option. Then press the ENTER
button.
Start Slide Show (or Stop Slide Show)
You can start or stop a Slide Show.
Press the or button to select “Start Slide Show” (or “Stop Slide Show”),
then press the ENTER
button.
Rotate
You can rotate images in full screen mode.
Press the or button to select “Rotate”, then press the ENTER
button.
Press the or button repeatedly to rotate the photo by the desired amount.
Whenever you press the button, it rotates by 270, 180, 90, and 0.
Whenever you press the button, it rotates by 90, 180, 270, and 0.
If you have select “Zoom”, the “Rotate” function is deactivated.
The rotated le is not saved.
The Rotating function information icon is displayed at the top right of the
screen
Icon Current OSD Function
0
Rotating (0°)
This rotates a photo to its original
position
90
Rotating (90°) This rotates a photo by 90 degrees
180
Rotating (180°) This rotates a photo by 180 degrees
270
Rotating (270°) This rotates a photo by 270 degrees
°
°
°
°
°
°
°
SUM
E
Slide Show
Previous
Next
TOOLS
Option
Return
20/22
Image001.jpg
440x440 2.0KB 2008/1/1
TOOLS
Stop Slide Show
Rotate
Zoom
Slide Show Speed : Normal
Background Music : Off
Background Music Setting
Picture Setting
Sound Setting
Information
EnterMove
e
Exit
90
Rotate
To Next Page
Loading...
