English - 64
WISELINK Pro
Using the WISELINK Pro Function
Connecting a USB Device
Storage Class (MSC) device.
1.
Press the POWER button on the remote control or front panel.
The TV is powered on.
2.
jack (USB jack) on the side of the TV.
If you enter the WISELINK Pro mode with no USB device connected the
message “No external storage device found. Check the connection status.”
will appear. In this case, insert the USB device, exit the screen by pressing
the W.LINK button on the remote control and enter the WISELINK Pro screen again.
MTP (Media Transfer Protocol) is not supported.
Certain types of USB Digital camera and audio devices may not be compatible with this TV.
WISELINK Pro only supports USB Mass Storage Class devices (MSC). MSC is a Mass Storage Class Bulk-Only
Transport device. Examples of MSC are Thumb drives and Flash Card Readers (Both USB HDD and HUB are not
supported.)
Please connect directly to the USB port of your TV. If you are using a separate cable connection, there may be a USB
Compatibility problem.
Do not disconnect the USB device while it is loading.
The sequential jpeg format is supported.
names to English, French or Spanish if necessary.
The higher the resolution of the image, the longer it takes to display on the screen.
The maximum supported JPEG resolution is 15360X8640 pixels.
limit may not be displayed in the Photo List (or Music List).
Using the Remote Control Button in WISELINK Pro Menu
Button Operations
Wheel
Move the cursor and select an item.
ENTER
Select the currently selected item.
- Pressing the ENTER
button during play pauses the play.
- Pressing the ENTER button during pause resumes the play.
/
RETURN Return to the previous menu.
TOOLS Run various functions from the Photo, Music and Movie menus.
/
Jump to previous group / Jump to next group.
INFO
W.LINK Exit WISELINK Pro mode.
CH
/
PRE.CH / FAV.CH / CH.LIST
Stop WISELINK Pro mode and Returns to TV mode.
EXIT Stop the current function and return to the WISELINK Pro main menu.
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
To Next Page
Loading...
