Setting up the TV with your PC
Preset: Press the N SOURCE button to select PC mode.
Auto Adjustment
❑
Use the Auto Adjust function to have the TV set automatically adjust the video signals it
values and positions.
Press the T TOOLS button to display Tools menu.
You can also set the Auto Adjustment by selecting ToolsAuto Adjustment.
This function does not work in DVI-Digital mode.
N
Screen
❑
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the
After the noise has been reduced, re-adjust the picture so that it is aligned on the center
of the screen.
Coarse
Adjusts the frequency when vertical noise appears on the screen.
Fine
Adjusts the screen to be clearer.
PC Position
Horizontal-Position.
Image Reset
You can replace all image settings with the factory default values.
Brightness : 45
Sharpness : 50
Auto Adjustment
Screen
Advanced Settings
Picture Options
Picture Reset
Picture
To Next Page
Loading...
