Connecting a USB Device
1. Press the POWER button to turn the TV on.
2.
side of the TV.
USB 1(HDD) jack is also used as the HDD jack. HDD (Hard disk drive) is device which
N
stores digitally encoded data.
Media Play only supports USB Mass Storage Class devices (MSC). MSC is a Mass
N
Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives and
Flash Card Readers (Both USB HDD and HUB are not supported.)
MTP (Media Transfer Protocol) is not supported.
N
N
Certain types of USB Digital camera and audio devices may not be compatible with this N
TV.
Please connect directly to the USB port of your TV. If you are using a separate cable connection, there may be a USB compatibility
N
problem.
N
Do not disconnect the USB device while it is loading.
N
N
The sequential JPEG, Progressive JPEG format is supported. (The JPEG2000, JPEG XR format system is not supported). N
N
English, French or Spanish if necessary.
The higher the resolution of the image, the longer it takes to display on the screen.
N
The maximum supported JPEG resolution is 15360X8640 pixels. N
N Not Supported File Format message is displayed.
N
N
DRM(Digital Rights Management) prevents illegal uses of digital media for copyright protection. N
When moving to a photo, loading may take a few seconds. N
Using the Remote Control Button in Media Play Menu ❑
Button Operations
Move the cursor and select an item.
ENTER
E
Select the currently selected item.
Play or pause the files while playing the Slide Sow, Music, or Movie files.
Play or pause the Slide Show, Music, or Movie file.
RETURN Return to the previous menu.
TOOLS Run various functions from the Photo, Music and Movie menus.
Stop the current Slide Show, Music or Movie file.
Jump to previous group/Jump to next group.
INFO Show file information.
MEDIA.P Enter or Exit Media Play mode.
Exit Exit Media Play mode.
Media Play
TV Rear Panel
USB Drive
To Next Page
Loading...
