Using the Media Play Function
This function enables you to view and listen to photo, music and movie files saved on a USB Mass Storage Class (MSC) device.
Entering the Media Play Menu
❑
1. Press the MENUApplication, then
press the ENTER
E
button.
2. Media Play (USB & DLNA), then press the
ENTER
E
button.
Press the
O MEDIA.P button on the remote control to display the Media Play
menu.
Press the
O SOURCE button on the remote control repeatedly to select USB or
DLNA, then press the ENTER
E
button.
3.
USB Memory Device (i.e. if connected through a hub). Press the ENTER
E
button.
This function differs depending on the USB Memory Device/ DLNA device
N
connected to TV.
The selected USB device name appears at the bottom left of the screen.
N
4. Photo, Music, Movie, Setup), then
press the ENTER
E
button.
To exit
N
Media Play mode, press the MEDIA.P button on the remote control.
In this mode, you can enjoy movie clips contained on a Game, but you cannot
N
play the Game itself.
Removing a USB Memory Device Safely
❑
You can remove the device safely from the TV.
1. Press the TOOLS
2. Safe Remove , then press the ENTER
E
button.
3. Remove the USB device from the TV.
Screen Display
❑
1.
2. View Groups: The sorting group including the currently selected photo is highlighted.
3
4. Item Selection Information: Shows the number of photos that are selected by pressing the Yellow button.
5. Current Device: Shows the currently selected device name.
Red
N (Device) button: Selects a connected device.
6. Help Items
Green (Favorites Setting
desired value appears.
Yellow (Selectc. Press the yellow button again
TOOLS
(Tools) button: Displays the option menus. (The Tools menu changes according to the current status.)
R RETURN (Return) button: Return to previous menu.
To Next Page
Loading...
