To connect to a Home Theater
❑
1. Connect the HDMI IN (1 (DVI), 2, 3, or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
2. Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI
cable.
Connect an Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on the
N
Home Theater.
When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the Home
N
Theater’s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO
Home Theater, not the TV.
Connect only one Home Theater.
N
Some HDMI cables may not support Anynet+ functions. N
Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status. N
Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type. N
Continued...
To Next Page
Loading...
