Network Connection - Wireless
❑
You can connect to the network wirelessly through a wireless IP sharer.
1. Connect the ‘Samsung Wireless LAN Adapter’ into the USB1(HDD) or USB2 terminal of the TV.
You must use the ‘Samsung Wireless LAN Adapter to use a wireless network.
N
Samsung’s Wireless LAN adapter is sold separately. The WIS09ABGN Wireless LAN adapter is offered by select retailers, N
Ecommerce sites and Samsungparts.com.
To use a wireless network, your TV must be connected to a wireless IP sharer.
N
If the wireless IP sharer supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network. N
Samsung’s Wireless LAN adapter supports IEEE 802.11A, IEEE 802.11B, IEEE 802.11G, IEEE 802.11N. When you play DLNA N
video over IEEE 802.11B/G connection, the video may not be played smoothly.
If the wireless IP sharer allows you to turn the Ping connection function on/off, turn it on.
N
Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is currently N
being used by another device nearby, this will result in interference and communications may fail.
If you apply a security system other than the systems listed below, it will not work with the TV.
N
When applying the security key for the AP (wireless IP sharer), only the following is supported. -
1) Authentication Mode : OPEN, SHARED, WPAPSK, WPA2PSK
2) Encryption Type : WEP, TKIP, AES
When applying the security key for the Ad-hoc mode, only the following is supported. -
1) Authentication Mode : SHARED, WPANONE
2) Encryption Type : WEP, TKIP, AES
N
N
TV Rear Panel
Samsung Wireless LAN
Adapter
LAN Cable
Wireless IP sharer
The LAN Port
on the Wall
To Next Page
Loading...
