Call Functions 28
Note:
To use this feature
Call Waiting
must be set to
Activated
.
To answer a call while a call is in progress:
1. Press the
Accept
soft key to answer the next incoming call. The first call is automatically placed on hold.
2. To switch between the two calls, press Options ➔ Swap and press the Select soft key or the
key.
•Swap
: Places the current call on hold and then activates the previous call.
To end a call:
1. Press the Options soft key. Highlight End and press the Right Navigation key.
2. Highlight
Active Call
, Held Call, or All Calls and press the Select soft key or the key.
3-Way Calling (Multi-Party Calling)
The 3-Way or Multi-Party feature allows you to answer a series of incoming calls and place them on hold. If
this service is supported by the network, all calls can be joined together. You are notified of an incoming call
by a call waiting tone.
Note:
The Join option combines all of the established calls (both active and on hold). Swap places the current call on hold and
then activates the previous call.
1. Press the
Accept
soft key to answer the first incoming call.
2. Press the
Accept
soft key to answer the next incoming call. The first call is automatically put on hold.
3. Join the first two callers by pressing the Options soft key. Use the Navigation keys to highlight Join and
press the Select soft key or the key.
•Join
: combines your current set of callers into a single multi-party call (both active and on hold).
4. Press the key to end the call.
To Next Page
Loading...
