Samsung AC BXU CH Series - Installing the Wind Baffle

27
English
Installing the wind baffle
Installing the wind baffle
When the outdoor unit might be faced with strong wind directly, the wind baffle should be installed to prevent the
outdoor unit fan from operating in reverse way.
࢘
Wind baffle is not supplied with the product.
<Front View>
24.6 inch (624.9mm)
0.6 inch (15.3mm)
Partition
Make holes on both sides and attach the
wind baffle using screws.
Make holes on both sides and attach the
wind baffle using screws.
<Top Down View>
“A” – Should be 7 7/8” (200mm) or longer
"A"
CAUTION
• When attaching the wind baffle using screws, be careful that the screws do not damage the partition and the heat
exchanger.
NOTE
• Install outdoor units with the back surface facing wall side to eliminate the effects of external wind.
ki]_TXYW][hTWWptjhjG|GvhhluUGGGY^ YWYYTXWTZXGGG㝘㤸GXWa[_a\`