Troubleshooting
4-4
The procedure of setting option(Cont.)
Steps Remote control display
12
Press the (Mode) button. Cool and Off appear on the remote control display.
13
Set the SEG16 and SEG17 values:
a Set the SEG16 value by pressing the
(Low Fan) button repeatedly until
the value you want to set appears on the remote control display.
b Set the SEG17 value by pressing the (High Fan) button repeatedly until
the value you want to set appears on the remote control display.
When you press the (Low Fan) or (High Fan) button, values appear in the
following order:
SEG 16
SEG 17
14
Press the (Mode) button. Dry and Off appear on the remote control display.
15
Set the SEG18 and SEG20 values:
a
Set the SEG18 value by pressing the (Low Fan) button repeatedly until
the value you want to set appears on the remote control display.
b
Set the SEG20 value by pressing the (High Fan) button repeatedly until
the value you want to set appears on the remote control display.
When you press the (Low Fan) or (High Fan) button, values appear in
the following order:
SEG 18
SEG 20
16
Press the (Mode) button. Fan and Off appear on the remote control display.
17
Set the SEG21 and SEG22 values:
a Set the SEG21 value by pressing the
(Low Fan) button repeatedly until
the value you want to set appears on the remote control display.
b Set the SEG22 value by pressing the (High Fan) button repeatedly until the
value you want to set appears on the remote control display.
When you press the (Low Fan) or (High Fan) button, values appear in
the following order:
SEG 21
SEG 22
To Next Page
Loading...
