Troubleshooting
4-5
The procedure of setting option(Cont.)
Steps Remote control display
18
Press the (Mode) button. Heat and Off appear on the remote control display.
19
Set the SEG23 and SEG24 values:
a Set the SEG23 value by pressing the
(Low Fan) button repeatedly until
the value you want to set appears on the remote control display.
b Set the SEG24 value by pressing the (High Fan) button repeatedly until
the value you want to set appears on the remote control display.
When you press the (Low Fan) or (High Fan) button, values appear in the
following order:
SEG 23
SEG 24
To Next Page
Loading...
