Disassembly and Reassembly
Samsung Electronics 123
No Parts Procedure Remark
7 Fan
&
Motor
1) Turn the hexangular nut attached to the top
of the Fan counterclockwise to remove it. Take
the Fan out of the Motor.
2) Turn the three hexangular nuts on the Motor
counterclockwise to remove the nuts. Take the
Motor Wires attached to these three locations
out with your hands prior to removing the Motor.
8 Evaporator
1) Remove the screws of the 2 Steel Holder Evaps
that are used to fix the Heat Exchanger, and then
remove it. (Use +Screw Driver)
2) Remove the 2 fixing screws of the Partition Evap
at the Heat Exchanger’s In/Out Pipe.
(Use +Screw Driver)
To Next Page
Loading...
