Troubleshooting
Samsung Electronics 363
4-4-39 Outdoor Temperature Sensor Error
1.
Cause of problem
Did the outside temperature
sensor connector break away
from the PCB?
Did the resistance
value significantly stray from the following
temperature table?
After separating the outdoor temperature sensor
connector from the PCB, measure the resistance value
between the terminals.
Restart operation after replace the PCB
Restart operation after connecting
the connector to the PCB.
Replace this since it is the defective of
the outdoor temperature sensor itself.
Ye s
No
No
Ye s
Temperature (°C)
70
60
50
40
30
20
10
0
-10
Resistance (K)
2.2
3.0
4.2
5.8
8.3
12.1
18.0
27.3
43.0
Resistance value measure part
OUT
OUT
Outdoor unit display
Indoor unit display
Criteria
Refer to the judgment method below.
Cause of problem
Outdoor temperature sensor Open/Short is defective.