Disassembly and Reassembly
148 Samsung Electronics
No Parts Procedure Remark
3 Evaporator 1) Disassemble the Cover Pipe that fixes the high/
low pressure Pipe.
- Unscrew 2 screws
2) Disassemble the Support Evap RH.
- Unscrew 4 screws
3) Disassemble the refrigerant temperature sensor,
Inlet air temperature sensor, and EEV wire that
connected to the inside of PCB.
4) Disassemble the Evaporator form the set.
To Next Page
Loading...
