Disassembly and Reassembly
174 Samsung Electronics
No Parts Procedure Remark
5 Stepping Motor
1) Loosen the 4 screws in rear side of Front
Cover assembly as shown in picture.
2)
Loosen the 2 screws as shown in picture.
3)
Disassemble the Blade and Stepping Motor
assembly and remove the 2 Screws Stepping
Motor.
6 Display PCB
1) Loosen the 3 screws in rear side of
Front Cover assembly as shown in picture.
2)
Disassemble Display PCB assembly and
Disconnect Wire.
3)
Disassemble the Display PCB.
To Next Page
Loading...
