Disassembly and Reassembly
Samsung Electronics 183
No Parts Procedure Remark
3) Release 2 screws and pull Bottom Discharge
Kit(
ᐙ ) out.
4)
Disconect the Step Motor wire(
ᐚ ) from the
conect wire . This part is right side of the Bottom
Discharge Kit(
ᐙ ).
5)
Pull Bottom Discharge Kit(
ᐙ ) Out from the bot-
tom of it.
6) Release 3 screws and pull the Evap out from top
to bottom direction.
྅
྆
྅
°
To Next Page
Loading...
