Samsung AM060MXMDCH Series User Manual

Air conditgioner
User manual/Installation manual
AR

HVSD

ŷ
Thank you for purchasing this Samsung air conditioner.
ŷ
Before operating this unit, please read this user manual carefully and retain it for
future reference.
Air conditioner
Installation manual
AM
777
XMDCH
77
ŷ
Thank you for purchasing this Samsung air conditioner.
ŷ
Before operating this unit, please read this manual carefully and retain it for future reference.

Samsung AM060MXMDCH Series Specifications

General

Brand	Samsung
Model	AM060MXMDCH Series
Category	Air Conditioner
Language	English

Summary

Safety precautions

General information

General safety guidelines and user responsibilities for operating the air conditioner.

Installing the unit

Key safety considerations and procedures for installing the air conditioner unit.

Power supply line, fuse or circuit breaker

Safety requirements for power supply connections, circuit breakers, and grounding.

Deciding to where to install the outdoor unit

Installation location

Installation and base ground work for an outdoor unit

Refrigerant pipe installation

Refrigerant pipe work

Essential considerations for refrigerant pipe length, height difference, and material selection.

Selecting and Installing Refrigerant Pipes

Details on pipe grades, thicknesses, diameters, and installation between units and Y-joints.

Y-joint Selection and Pipe Brazing

Pipe Cutting, Flaring, and Brazing Direction

Flare Connection Tightening

Correct procedures and torque specifications for tightening flare connections.

Pipe installation for an outdoor unit

Refrigerant Y-joint installation

Refrigerant header joint installation

Performing air tightening test

Nitrogen Gas Airtight Test Procedure

Steps for conducting an airtight test with nitrogen gas.

Vacuuming a pipe and an indoor unit

Vacuuming Procedure and Checks

Steps for vacuuming, checking pressure, and troubleshooting.

Selecting additional refrigerant charging

Calculating Refrigerant Charge

Formulas and tables for determining additional refrigerant.

Insulating the refrigerant pipes and branch joints

Refrigerant Pipe Insulation Guidelines

Insulating refrigerant pipe

Wiring work

Conduit and Wiring Practices

Specification for circuit breaker and power supply cord

Installing grounding wire

Grounding Procedures and Standards

Grounding Rod Installation and Testing

Setting outdoor unit option switch and key function

Setting total number of installed indoor units

Installing and setting the option with tact switch

Setting Unit Options

Outdoor Unit Optional Settings

Setting key operation and view mode

Key Operation Modes

K3 and K4 Operation Functions

K4 Operation for Unit Information

Checking lists after finishing installation

Installation Checklist Categories

Checklist for installation, pipes, wiring, addresses, and options.

Inspection and check operation

Pre-Operation Checks and Precautions

Safety guidelines before starting operation and steps for inspecting components and connections.

Guaranteed Operating Conditions

Auto trial operation

Troubleshooting E503 Error

Automatic refrigerant amount detection

Refrigerant Amount Check Procedure

Refrigerant Check Precautions and Actions

Trial operation