Samsung Electronics 266
Key Options
8-4 How to check the view mode using a tact switch
Setting outdoor unit key function
Installing and setting the option with tact switch and explanation of the functions
Setting the option
1. Press and hold K2 to enter the option setting. (Only available when the operation is stopped)
- If you enter the option setting, display will sho w
the following. (If you have set the 'Emergency operation
for compr essor malfunction', 1 or 2 will be displayed on Seg 4.)
- Seg 1 and Seg 2 will display the number for selected option.
- Seg 3 and Seg 4 will display the number for set value of the selected option.
2. If you ha
ve entered option setting, you can shortly press the K1 swit ch to adjust the value of the Seg 1, Seg
2 and select the desired option. (Refer to pages 74~77 for the
Seg number of the function for each option)
Example)
3. If you have selected desired option, you can shortly press the K2 switch to adjust the value of the Seg 3, Seg
4 and change the function for the se
lected option.
(Refer to pages 74~77 for the Seg number of the function for each option)
Example)
To Next Page
Loading...