operating basic function
TURNING THE AIR CONDITIONER ON AND OFF
Press the Power button on the remote controller.
You will hear a ring and the air flow blade will move automatically when
the air conditioner is properly on.
The air conditioner will operate in the most recent operation mode
used or Auto mode.
When you turn off the air conditioner, air flow blade will stop moving.
Turning on/off your air conditioner without the remote controller.
You can operate your air conditioner by pressing the
Power button on the indoor unit control panel.
SELECTING OPERATION MODE
Auto
In Auto mode, the air conditioner will automatically set the temperature and fan speed depending
on the room temperature detected by the room temperature sensor.
1. Turn on the air conditioner.
Press the Power button on the remote controller.
2. Set the operation mode.
Press the Mode button on the remote controller until
Auto mode and Auto fan speed indicator appear on the
remote controller display.
The air conditioner will automatically set the operation
mode to Cool depends on the room temperature.
Each time you press the
Mode button, the mode will
change in order of Cool, Auto, Dry and Fan.
3. Adjust the temperature (if you need to increase or
decrease the room temperature).
Press the Temp or button on the remote controller
to increase or decrease the desired temperature.
You can set the desired temperature between the
range of 18˚C~30˚C.
You can increase/decrease the temperature by 1
˚C.
• While the air conditioner is already operating in another mode, press the Mode button
until Auto mode indicator appears on the remote controller display.
• When you are using the remote controller, make sure correct indicator which matches
your selection appears on the remote controller display.
• Air flow can be adjusted manually (see pages 18~19 for instructions).
To Next Page
Loading...
