using advanced functions
USING THE TURBO FUNCTION
Turbo function will be helpful to cool your room quickly and effectively by operating at the maximum
fan speed for 30 minutes.
1. Turn on the air conditioner.
Press the Power button on the remote controller.
2. Set the operation mode.
Press the Turbo/Long button on the remote controller
once. Turbo indicator will appear on the remote
controller display.
The air conditioner operates in High fan speed and
automatically adjusts the temperature according to the
current room temperature. The unit operates for
30 minutes and then operates in last used mode or in
Auto mode if Dry/Fan mode is most recent mode used.
• Turbo function is only available in Cool/Auto mode.
If Turbo function is selected in Dry/Fan mode, operation mode changes to Auto.
• You cannot use Turbo and Long function at the same time.
To deactivate Turbo function
1. Press the Turbo/Long button on the remote controller twice while Turbo function is on.
The air conditioner operates in last used mode or in Auto mode if Dry/Fan mode is most
recent mode used.
• While you are using the remote controller, make sure corresponding indicator appears on
the remote controller display.
• Temperature/Fan speed cannot be adjusted while using this function.
• Air flow can be adjusted manually (see pages 18~19 for instructions).
• If you press the Mode button while the Turbo function is on, it will cancel the function.
To Next Page
Loading...
