USING THE AIR CONDITIONER WITH THE CONTROL PANEL
You can control the air conditioner without the remote controller.
1. Press the Power button on the indoor unit control panel.
You will hear a ringing sound and the air conditioner will operate in the most recent operation
mode used or Auto mode.
To turn off the air conditioner, press the
Power button again.
2. Press the Temp or button to adjust the temperature.
You can set the desired temperature between the range of 18°C~30°C.
You can increase/decrease the temperature by 1
°C.
3. Press the Fan Speed button to adjust the fan speed.
Each time you press the
Fan Speed button, the fan speed will change in order of
Auto( ), Low( ), Medium( ) and High( ).
4. Press the Mode button to select operation mode.
You can select operation mode you want by pressing the
Mode button.
Each time you press the
Mode button, the mode will change in order of Cool, Auto,
Dry and Fan.
To Next Page
Loading...
