Fan
Fan mode can be selected to ventilate your room. Fan mode will be helpful to refresh the stale air
in your room.
1. Turn on the air conditioner.
Press the Power button on the remote controller.
2. Set the operation mode.
Press the Mode button on the remote controller until
Fan mode indicator appears on the remote controller
display.
The air conditioner operates in Fan mode and circulate
the indoor air.
Each time you press the
Mode button, the mode will
change in order of Cool, Auto, Dry and Fan.
3. Set the fan speed.
Press the Fan or button on the remote controller
to set the desired fan speed.
Each time you press the
Fan or button, fan
speed will change in order of Low, Medium and High.
• While you are using the remote controller, make sure correct indicator which matches
your selection appears on the remote controller display.
• Air flow can be adjusted manually (see pages 18~19 for instructions).
To Next Page
Loading...
