Selecting the Automatic Operating Mode
E-15
ENGLISH
You can start the air conditioner in the Automatic mode.
In the Automatic mode, the temperature and the optimum fan speed is
selected automatically.
If the is not displayed on the control panel, press the button on the
remote control one or more times until it appears.
Result: ◆ The indoor unit beeps each time you press the button.
◆ The air conditioner runs in the Auto mode.
2
◆ You can change modes at any time.
◆ If the indoor temperature is higher than
74
O
F(
24°C), the air
conditioner operates in the Cool mode. If the indoor
temperature is lower than
68
O
F(
20°C), the air conditioner
operates in the Heat mode.
N
N
o
o
t
t
e
e
To control the direction of the air flow, refer to page 20.
3
◆
Cooling operation
◆
Heating operation
1
If necessary, press the (On/Off) button.
Result:
◆ The power indicator on the control panel comes on.
◆ The indoor unit beeps.
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Switched on
◆ Stopped
lt will start up normally after three minutes.
IMPORTANT
To Next Page
Loading...
