Operating to the Long Distance
E-17
ENGLISH
The Long function is used to
Cool
/
Auto(Cool)
your room as far as possible.
In the Long function, the up/down orientation of air flow and fan
speed are selected automatically.
Press the button twice.
Result:
◆ The air conditioner cools the room as far as possible.
◆ The fan settings are adjusted automatically.
2
To adjust the temperature, press the buttons one or more times until the
required temperature is displayed.
Possible temperatures are between
65
O
F(18°C) and 86
O
F(30°C) inclusive.
Result: ◆ Each time you press the buttons:
- The temperature is adjusted by
1
O
F(
1
°C)
.
- The indoor unit beeps.
3
If you wish to stop the Long function, press the button again.
Result:
◆ The air conditioner is reset automatically to the previous
mode, temperature and fan settings.
4
To control the direction of the air flow vertically, refer to page 20.
5
You can't control the airflow direction horizontally in the Long function.
N
N
o
o
t
t
e
e
1
If necessary, press the (On/Off) button.
Result:
◆ The power indicator on the control panel comes on.
◆ The indoor unit beeps.
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Switched on
◆ Stopped
lt will start up normally after three minutes.
IMPORTANT
To Next Page
Loading...
