Before contactinq a service centre
The flash does not fire
oFlash off mode has been selected
-e. Dis-engage flash off mode
oThe camera mode can't use the flash
-+ Refer to the FLASH instruction (p.29)
Incorrect date and time is disc)laved
• The date and time have been set incorrectly or the camera has
adopted the default settings
-+Reset the date and time correctly
Imaues are too bricihtht
• Exposure is excessive
-+ Reset exposure compensation
No imaue on external monitor
• The external monitor has not been connected properly with
the camera
-e Check the connection cables
oThere are incorrect files in the memory card
-+ Insert a memory card that has correct files
The camera buttons do not o#erate
• Camera malfunction
-+ Remove/re-insert battery and switch the camera on
A card error has occurred while the memory card is in the camera.
• incorrect memory card format
-+ Re-format the memory card
The imaues don't ulav back
• Incorrect file name (Violation of DCF format)
-+ Do not change the image file name
When usina the PC's explorer, the [Removable Disk[file does not show
oCable connection is incorrect
-e Check the connection
oThe camera is off
-+ Turn the camera on
• The operating system is not Windows 2000, XP, Vista / Mac OS
10.3. Alternatively the PC does not support USB
-+ Instalt Windows 2000, XP, Vista / Mac OS 10.3 to PC that
supports USB
Colour of imaae is different to the oriqinal scene
oWhite balance or effect setting is incorrect
-+ Select appropriate White balance and effect
76
To Next Page
Loading...
