Product spec and feature
Samsung Electronics
Service Manual
2-11
1) Toner Cartridge
* Method of Toner supply : Toner is transported to the developing roller by supply belt.
* Regulating Toner level : Regulating Toner level by SUS. Blade
* OPC Cleaning: Collect the toner by using Cleaning Blade (urethane)
* OPC Drum protecting Shutter : No (Take care of impact)
2) PTB(Paper Transfer Belt)
* The life span: Print over 50,000 sheets
* Specification: Similar to DaVinci(CLP-600) Ass y.
* TANDEM Method Paper Transporting Unit by using Paper Transfer Belt
* Belt Driving Method : Friction Driving by Drive Roller
* Belt Cleaning : Collect the toner by using Rubber Blade
* Management of waste toner : The Waste Toner Tank Be equipped
3) Transfer Roller
Once the complete, full colour, image, has been built up on the ITB the Transfer Roller is used to
transfer the image onto paper. This is called the T2 Transfer (T2 Transfer is none)
To Next Page
Loading...
