Samsung CLP-610ND - Monitoring the Supplies Life; Cleaning Your Machine

Adjustment and Troubleshooting
Service Manual
4-23
Samsung Electronics
Monitoring the supplies life
If you want to view the supply life indicators, follow the next step.
1. Press the Menu button on the control panel until you see System Setup on the bottom line of the display.
2. Press the OK button.
3. Press the Left/right arrow button until Maintenance displays.
4. Press the OK button.
5. Press the Left/right arrow button until Supplies Life displays.
6. Press the OK button.
7. The display shows two options as you press the Left/right arrow button.
• Total : displays the total number of pages printed.
• Toner Remains: displays how much toner remains in the cartridge.
8. When you select the option, press OK to browse the life.
Clearing the toner empty message
When you want to set the machine not to show the toner empty and replace the toner message, follow the
next steps.
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, then enter password and press OK.
3. Press the General tab > Ignore Toner Empty Status.
4. Press On.
5. Press OK.
Cleaning your machine
To maintain print quality, follow the cleaning procedures below each time the toner cartridge is replaced or if
print and scan quality problems occur.
Cleaning the outside
Clean the machine cabinet with a soft lint-free cloth. You can dampen the cloth slightly with water, but be
careful not to let any water drip onto or into the machine.
Cleaning the inside
Contact a service representative to clean the inside of the machine.