Samsung Electronics
Service Manual
Disassembly and Reassembly
3-2
3.1.3 Releasing Plastic Latches
Many of the parts are held in place with plastic latches. The latches break
easily; release them carefully.
To remove such parts, press the hook end of the latch away from the part
to which it is latched.
3.2 Parts for Maintenance and Repair
3.2.1 Replacement interval for parts with a limited life
Some of the parts in this printer have a limited life, shorter than that of the whole machine. These parts
must be replaced periodically.
The table below shows the interval at which these parts should be replaced.
The table shows the life of each part, and is measured when using A4 paper. When servicing a machine
always check the status of these parts using the control panel and ensure that parts are replaced at the
appropriate times otherwise a general degradation in print quality will occur.
Item(s) Pages Printed Part number Remark
Approx.Initial : 2500 Pages CLP-K660A (Black)
Sales : 5500 Pages CLP-K660B (Black)
CLP-C660A(Cyan)
CLP-M660A(Magenta)
CLP-Y660A(Yellow)
CLP-C660B(Cyan)
CLP-M660B(Magenta)
CLP-Y660B(Yellow)
PTB
Approx. 50,000 black pages
or 50,000 color pages
CLP-T660A
CLP-T660B(with duplex unit)
Pick-up roller Approx. 70,000 Pages
Fuser Unit
Approx. 100,000 black pages
or 100,000 color pages
User Replacement
Engineer
Replacement
Approx.Initial : 2000 Pages
Sales : 5000 Pages
Black toner cartridge
Color toner cartridge
To Next Page
Loading...
